www.Contractors Estimate.com
Certified DGS Trade and Focus Publication since 2002


CE Trade - Trade Paper
 
Online DVBE certification is here!
ARTICLES
&
EDITORIALS

RESOURCES
&
LINKS

City of San Diego SLBE - ELBE Program

SBE/DVBE Search

Minority Business Development Agency

Advertisement date July 2, 2024 @ 12:22 p.m. through bid opening date

Papich Construction Company is requesting quotations from all qualified DBE Sub-contractors and Material suppliers for the following project:

Agency: Caltrans No. 06-0W9104
Project: Construction on State Highway In Tulare County In And Near Tulare From Paige Avenue Overcrossing To Prosperity Avenue Overcrossing.
Location: Tulare County /06-Tul-99-27.6/30.6
Plans & Specs: https://ppmoe.dot.ca.gov/des/oe/weekly-ads/oe-project.php?q=06-0W9104
DBE Goal: 21%
Engineers Estimate: $21,000,000
Bid Date: Thursday, August 8, 2024, at 2:00 PM

General work description: HMA, RHMA-G, jointed plain Conc Pvmt (RSC) and STBB (Type M).

Estimating Dept.
Email: estimating@papichconstruction.com

Quotes for Services and Supplies requested for the following items for bid including, but not limited to: Lead Compliance Plan, Time-Related Overhead (Wday), Dispute Resolution Board On-Site Meeting, Hourly Off-Site Dispute-Resolution- Board-Related Tasks, Construction Area Signs, Traffic Control System, Stationary Impact Attenuator Vehicle, Channelizer (Surface Mounted), Traffic Drum, Temporary Barrier System, Temporary Pedestrian Access Route, Portable Changeable Message Sign (Ls), Temporary Crash Cushion Tl-3, Job Site Management, Stormwater Pollution Prevention Plan, Storm Water Annual Report, Temporary Drainage Inlet Protection, Temporary Construction Entrance, Street Sweeping, Temporary Concrete Washout, Treated Wood Waste, Clearing And Grubbing (Ls), Roadway Excavation, Roadway Excavation (Type Z-2) (Aerially Deposited Lead), Shoulder Backing, Structure Excavation (Culvert), Sand Bedding, Structure Backfill (Culvert), Imported Borrow (Cy), Move-In/Move-Out (Erosion Control), Hydromulch, Hydroseed, Class 2 Aggregate Base (Cy), Segment Correction, Hot Mix Asphalt (Type A), Rubberized Hot Mix Asphalt (Gap Graded), Place Hot Mix Asphalt Dike (Type A), Place Hot Mix Asphalt Dike (Type E), Place Hot Mix Asphalt Dike (Type F), Tack Coat, Remove Asphalt Concrete Pavement (Sqft), Remove Asphalt Concrete Dike, Cold Plane Asphalt Concrete Pavement, Jointed Plain Concrete Pavement (Rsc), Drill And Bond (Dowel Bar), Remove Concrete Pavement (Cy), 60" Cast-In-Drilled-Hole Concrete Pile (Sign Foundation), Structural Concrete, Drainage Inlet, Drill And Bond Dowel (Chemical Adhesive)(Lf), (F) - Furnish Sign Structure (Bridge Mounted Without Walkway), (F) - Install Sign Structure (Bridge Mounted Without Walkway), Furnish Sign Structure (Versatile Truss), Install Sign Structure (Versatile Truss), Remove Sign Structure (Ea), Remove Bridge Mounted Sign, 18" Alternative Pipe Culvert, Stress Reducing Slab, 12" Reinforced Concrete Pipe, 18" Reinforced Concrete Pipe, 24" Reinforced Concrete Pipe, 24" Concrete Flared End Section, Remove Culvert (Lf), Remove Inlet, Remove Flared End Section (Ea), Modify Inlet Grate, 24" Cured-In-Place Pipeliner, Concrete (Concrete Apron), Detectable Warning Surface, Minor Concrete (Stamped Concrete), Minor Concrete (Curb, Sidewalk And Curb Ramp), Remove Concrete Sidewalk (Sqyd), Remove Concrete (Curb And Gutter), Pre/Post Construction Surveys, (F) - Miscellaneous Iron And Steel, Delineator (Class 1), Pavement Marker (Retroreflective), Remove Roadside Sign, Remove Roadside Sign (Steel Post), Remove Sign Panel, Furnish Laminated Panel Sign (1"-Type A), Furnish Laminated Panel Sign (1"-Type B), Furnish Laminated Panel Sign (2 1/2"-Type B), Furnish Single Sheet Aluminum Sign (0.063"-Unframed), Furnish Single Sheet Aluminum Sign (0.080"-Unframed), Furnish Single Sheet Aluminum Sign (0.063"-Framed), Furnish Single Sheet Aluminum Sign (0.080"-Framed), Roadside Sign - One Post, Roadside Sign - Two Post, Install Sign (Strap And Saddle Bracket Method), Install Sign Panel On Existing Frame, Install Framed Sign Panel, Install Roadside Sign (Laminated Wood Box Post), Furnish Laminated Wood Box Post (Type L), Furnish Laminated Wood Box Post (Type M), Midwest Guardrail System (Steel Post), Vegetation Control (Minor Concrete), Single Thrie Beam Barrier (Type M), Transition Railing (Type Agt), End Anchor Assembly (Type Sft-M), Alternative In-Line Terminal Tl-3, Remove Guardrail, Thermoplastic Pavement Marking (Enhanced Wet Night Visibility), 6" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility) (Broken 12-3), 6" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility) (Broken 17-7), 6" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility), 8" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility), 12" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility), 12" Rumble Strip (Asphalt Concrete Pavement), Contrast Stripe Paint (1-Coat), 6" Traffic Stripe Tape (Warranty) (Broken 36-12), , 6" Traffic Stripe Tape With Contrast (Warranty) (Broken 36-12), Ramp Metering System, Traffic Monitoring Station System, Camera Systems, Modifying Lighting Systems, Modifying Traffic Monitoring Stations, Mobilization

Requirements: At the time of the bid, all subcontractors must possess a valid and relevant California Contractors License, a valid DIR registration number, meet the project’s minimum insurance requirements, and be 100% bondable. All subcontractor, supplier, and trucking proposals must be in strict accordance with the project plans, specifications, and any addenda issued. In addition, all Supplier and Subcontractors will be required to execute Papich’s standard subcontract or purchase order agreement (available upon request). Waiver of Subrogation will be required. Papich is a signatory contractor and will require a one-time job agreement for any non-union Subcontractors. Submission of a proposal shall constitute subcontractor, supplier, or trucker acceptance of all terms as listed above. Any attempted deviation or revision to said terms shall not be recognized by Papich. Papich can offer DBE firms assistance with bidding this contract including but not limited to: reducing items of work into smaller scopes, providing reimbursement for payment/performance bond premiums, and providing assistance obtaining materials. All requests for assistance must be made prior to the project bid date. Additionally, DBE firms must possess a valid and current certification to be considered for this contract. Questions concerning above requirements should be directed to our office prior to submission of a proposal.

Heavy Civil | Oil & Gas | Power | Site Development | Transportation
398 Sunrise Terrace | Arroyo Grande, CA 93420
Phone: 805-473-3016 Fax: 805-481-5966

Published by Contractor’s Estimate, Inc.
Located at http://www.contractorsestimate.com

This advertisement will run through the bid date.

 
NEWS
&
EVENTS

FEDERAL BIDDING OPPORTUNITIES

Caltrans Currently Advertised Projects

SAM SYSTEM FOR AWARD MANAGEMENT

SMBE/SWBE Query

Elite SDVOB Network

 

 
What are we about? Contact us HOME