Is requesting sub-bids from qualified DBE Subcontractors and Suppliers for the following project:
DEL AMO BOULEVARD AT HAMILTON AVENUE- Project # RDC0015793
Installation and modification of traffic
signals; reconstruction of curb, gutter, and curb ramps; installation of striping and
pavement markings; and the performance of other appurtenant work.
BID DATE: AUGUST 15, 2017 BID TIME: 11:00 AM
Comet Electric, Inc requests subquotes from all qualified subcontractors and suppliers including certified DBE firms performing commercially useful function for the following items of work, including but not limited to:
CONSTRUCTION SCHEDULE (BASELINE) (STIPULATED UNIT
PRICE OF $2,000),CONSTRUCTION SCHEDULE (UPDATE) (STIPULATED UNIT
PRICE OF $500/MTH),CONSTRUCTION SCHEDULE (AS-BUILT) (STIPULATED UNIT
PRICE OF $2,000),SCE WORK (ALLOWANCE OF $10,000),CONCRETE REMOVAL (NON-REINFORCED), UNCLASSIFIED EXCAVATION, TRENCH BACKFILL SLURRY (CLASS 270-E-500), AC PAVEMENT(PATCH BACK),PCC CURB & GUTTER, TYPE A2-VAR, PCC CURB RAMPS, DETECTABLE WARNING SURFACE, 3" CONDUIT (SCH 80 PVC), 3-CONDUCTOR SIGNAL CABLE(EXCLUDING CONDUIT), 5-CONDUCTOR SIGNAL CABLE(EXCLUDING CONDUIT), 12-CONDUCTOR SIGNAL CABLE(EXCLUDING CONDUIT), NO. 6 PULL BOX INCL PCC COVER, GPS UTB UNIT AND ANTENNA, SWITCH PACK, PED ISOLATION MODULE, TYPE 332 CABINET, TYPE 332 CABINET FOUNDATION, TYPE III-BF SERVICE CABINET, TYPE III-BF SERVICE CABINET FOUNDATION, TYPE 15TS STANDARD FOUNDATION, TYPE 15TS STANDARD, TYPE 15TS STANDARD WITH MODIFIED 23' HIGH POLE, TYPE 26 STANDARD, TYPE 26 STANDARD WITH MODIFIED 23' HIGH POLE, TYPE 26 STANDARD FOUNDATION, #6 WIRE, #10 WIRE, 30' SIGNAL MAST ARM, 40' SIGNAL MAST ARM, 8' STRAIGHT MAST ARM FOR STREET NAME SIGN, 12' LUMINAIRE MAST ARM, 12' HORIZONTAL LUMINAIRE MAST ARM, LED LUMINAIRES (200W HPS EQUIVALENT), LED LUMINAIRES (250W HPS EQUIVALENT), PEDESTRIAN PUSH BUTTON, PEDESTRIAN PUSH BUTTON PLATE, 4-CAMERA RADAR/VIDEO DETECTION SYSTEM (COMPLETE), DOUBLE FACE RETROREFLECTIVE STREET NAME SIGN, 3-12" LED VEHICLE HEAD (COMPLETE), LED PEDESTRIAN HEAD (COMPLETE), DETAIL 8 (THERMOPLASTIC), DETAIL 29 (THERMOPLASTIC), DETAIL 38A (THERMOPLASTIC), 4" STRIPING (THERMOPLASTIC), 12" STRIPING (THERMOPLASTIC), REMOVE DETAIL 8 (THERMOPLASTIC), REMOVE DETAIL 28 (THERMOPLASTIC), REMOVE DETAIL 38A (THERMOPLASTIC), REMOVE DETAIL 27B (THERMOPLASTIC), REMOVE PAVEMENT MARKINGS (THERMOPLASTIC), REMOVE 12" STRIPING (THERMOPLASTIC), SIGN PANEL, FURNISH ONE-POST (ROADSIDE SIGN), INSTALL ONE-POST (ROADSIDE SIGN), INSTALL SIGN (STRAP AND SADDLE BRACKET), INSTALL SIGN (MAST-ARM HANGER), REMOVE SIGN, REMOVE SIGN POST, & TRAFFIC CONTROL.
including items of work normally performed by Comet Electric.
Quotations will be broken down into comparable packages as reasonably necessary. Comet Electric will work with interested DBE subcontractors to identify opportunities to break down items into economically feasible packages.
The contract documents for this project may be downloaded
free of charge by visiting the following website:http://dpw.lacounty.gov/general/contracts/opportunities/cons/ProjectDetailAdv.aspx?project_id=RDC0015793
Please call if you need any bidding assistance including but not limited to; obtaining bonding, insurance, equipment, materials and/or supplies.
Comet Electric, Inc intends to work cooperatively with all qualified DBE firms seeking work on this project.
Comet Electric, Inc
21625 Prairie St, Chatsworth, CA 91311
(818) 340-0965 Office
(818) 280-5725 Direct
(818) 340-4033 Fax