Advertisement date November 9, 2021 @ 9:15 a.m. through bid opening date

Comet Electric, Inc an Equal Opportunity Employer is requesting sub-bids from all qualified subcontractors and suppliers including certified DBE firms performing commercially useful function for referenced project:

Agency: City of Pasadena
Project: Union Street Two-way Protected Bikeway (Cycle Track)
FEDERAL-AID PROJECT ATPCML-5064(089)
Estimated Bid Value: $5,800,000.00 to $7,800,000.00
Plans & Specs can be downloaded for free at:
https://www.dropbox.com/sh/dvftzpl1i1725p3/AAANs4iX2d06TJG1uQH81GF6a?dl=0
DBE Goal: 12%

Bids open November 30, 2021 at 2:00 PM

The scope of work consists the installing new and modification of existing traffic signals, fiber optic communication, ADA pedestrian ramp improvement, street improvement, and roadway restriping on Union Street, from Arroyo Avenue on the west to Holliston Avenue on the east, and Holliston Avenue from Union Street on the north to Green Street on the south. The work includes furnishing and installing new traffic signal standards, traffic signal equipment, conduit, conductors, pull boxes, traffic signal controller and cabinet, fiber optic communication, ethernet switch, splice enclosure, bulb outs, curb ramps, slurry seal, resurfacing, curb and gutter, striping and signage, removal of existing traffic signals, relocating catch basin, median island, and miscellaneous appurtenant work.

Quotes for Services and Supplies requested for the following items for bid including, but not limited to: SWPPP, Remove Concrete, Pcc Curb & Gutter, Install Cast In Place Detectable Warning Surface, Remove Approximately 12' Rcp Storm Drain Pipe, Install 18" Diameter Rcp Storm Drain Pipe., Construct Pipe Connection To Existing Storm Drain, Construct Double Manhole Culvert Frame And Cover, Localized Repairs At Various Locations As Directed By The City, (Assume 3,000 Sf), Cold Mill Asphalt Concrete Pavement, Variable Depth, 2" Thick Asphalt Rubber Hot Mix (Arhm) Overlay, Slurry Seal Modified Type Ii With 2.5% Latex Rubber Modifier, With Carbon Black Additive Over Ac Pavement, Remove And Relocate Street Light Pole And Assembly, Adjust Utility Cover To Grade, Adjust Storm Drain/Culvert Manhole To Grade, Remove Tree, And Roots To 3 Feet Below Grade, High‐Durability Flexible Delineator, Furnish Single Sheet Aluminum Sign (0.063"‐Unframed), Roadside Sign ‐ One Post, Relocate Sign Panel, Remove Sign Panel, Object Marker (Type P), Pavement Marker (Retroreflective), 6" Thermoplastic Traffic Stripe (White Or Yellow), 8" Thermoplastic Traffic Stripe, 6" Thermoplastic Traffic Stripe (Dotted 3‐9), 6" Thermoplastic Traffic Stripe (Broken 8‐4), 8" Thermoplastic Traffic Stripe (Broken 12‐3), 6" Thermoplastic Traffic Stripe (Broken 6‐1), 6" Thermoplastic Traffic Stripe (Broken 17‐7), Thermoplastic Pavement Marking, Thermoplastic Crosswalk Marking, 12" Thermoplastic Traffic Stripe, Green Thermoplastic Pavement Marking, Remove Thermoplastic Traffic Stripe, Remove Thermoplastic Pavement Marking, Removal (Traffic Signal Cabinets, Traffic Signal Poles, Street Lights,, Foundations, And Miscellaneous Equipment), Rewire Intersection, Furnish And Install 2070E Controller In Existing Cabinet, Furnish And Install 2070E Controller And Type 332 Cabinet., Construct Foundation Complete, Furnish And Install New Video Detection System With Cameras, Furnish And Install New Dlcs, Furnish And Install New Signal Head (3‐Section Led), Furnish And Install New Signal Head (4‐Section Led), Furnish And Install New Bicycle Signal Head (3‐Section Led), Furnish And Install Pedestrian Push Button, Pole And Foundation., Furnish And Install Aps Push Buttons, Furnish And Install Countdown Pedestrian Heads, Furnish And Install Led Luminaire Assembly, Furnish And Install New Type 1‐A Standard And Foundation, Furnish And Install New Type 15Ts Standard And Foundation, Furnish And Install New Type 17‐3‐100 Standard And Foundation With 15 Ft, Or 20 Ft Mast Arm, Furnish And Install New Type 19‐4‐100 Standard And Foundation With 30 Ft, Mast Arm, Furnish And Install New Type 24‐4‐100 Standard And Foundation With 35 Ft, Mast Arm, Furnish And Install New Type 26‐4‐100 Standard And Foundation With 40 Ft, Mast Arm, Furnish And Install New Type 19 Modified Standard And Foundation With 15, Ft Mast Arm, Furnish And Install Sign On The Traffic Signal Pole/ Mast Arm, Furnish And Install Reflective Street Name Sign (R.S.N.S.), Furnish And Install New Type #3 Pullbox, Furnish And Install New Type #3 Double Stack Pullbox, Furnish And Install 3" Conduit, Furnish And Install 4" Conduit, Furnish And Install New Type D Bike Loop Detector And Symbol, Furnish And Install 2" Rigid Conduit Stub Out., Furnish And Install 72 Strand Smfo Cable, Furnish And Install 12 Strand Smfo Drop Cable, Furnish And Install #10 Green Wire, Furnish And Install 2‐2" Hdpe (Orange, Green, Grey) Conduit, Furnish And Install 3" Galvanized Steel Conduit, Furnish And Install Splice Enclosure, Perform Splicing Of, Backbone And Drop Fiber Optic Cable, Furnish And Install New Ethernet Switch Per Specifications, Furnish And Install Fiber Patch Panel (Fpp) And Complete, Connections To Drop Cable, Pigtails, And Fpp, Furnish And Install Number 3 Pull Box, Furnish And Install Number 3 Double Stack Pull Box (Splice, Disconnect, Pull, And Reconnect Existing Copper, Communication Cable To New Traffic Signal Cabinet., Terminate Fiber Optic Cable In Cabinet, Furnish And Install 96 Strand Smfo Cable, Removal (Fiber Optic Cable, Miscellaneous Communication, Equipment) Traffic Control.

Comet Electric, Inc is willing to break items of work into smaller increments to assist DBE Contractors and Suppliers in obtaining work on this project. 100% Performance and Payment bonds required. Subcontractor’s must possess a current contractor’s license.

Requirements: No Contractor or Subcontractor shall be qualified to bid on, be listed in a bid proposal or engage in the performance of any contract for public work, unless currently registered to perform public work with the Dept of Industrial Relations https://efiling.dir.ca.gov/PWCR/Search.action

Please call if you need any bidding assistance including but not limited to; obtaining bonding, insurance, equipment, materials and/or supplies. The US Small Business Administration may also assist you in obtaining bonding - please see the following site for information: http://www.sba.gov/content/contractors#
California Access to Capital Program Financing Solutions for your small business http://www.calbizfinance.org/cal_cert_biz_program.html

Comet Electric, Inc
License# 681827
21625 Prairie St, Chatsworth, CA 91311
Contact: Louis Perez
818-340-0965 Office
818-340-4033 Fax
louisperez@cometelectric.com

Published on November 9, 2021 @ 9:15 a.m. by Contractor’s Estimate, Inc.
Located at http://www.contractorsestimate.com
This advertisement will run until the bid date