Is requesting sub-bids from qualified DBE Subcontractors and Suppliers for the following project:
Project Name: SANTA GERTRUDES AVENUE AT SILVERGROVE DRIVE AND LEFFINGWELL ROAD AT ARROYO DRIVE TRAFFIC SIGNALS, ET AL
Federal-Aid Project No. HSIPL-5953 (690), HSIPL-5953 (691), HSIPL-5953 (693)
Project No. RDC0015966
Project Description: Installation and modification of traffic signals; reconstruction of curb and gutter, and curb ramps; installation of striping and pavement markings; and the performance of other appurtenant work.
BID DATE: Tuesday, November 28, 2017
Location: Santa Gertrudes Ave at Silvergrove Dr
DBE goal: 10%
**The work is estimated to cost between $875,000 and $1,175,000 and shall be completed in 80 working days.**
**The prime contractor shall possess a valid California Class A and C10 contractor's license.**
Comet Electric, Inc requests subquotes from all qualified subcontractors and suppliers including certified DBE firms performing commercially useful function for the following items of work, including but not limited to: Construction Schedule , Mobilization, Sce Work , Concrete Removal (Non-Reinforced), Unclassified Excavation, Crushed Miscellaneous Base, Trench Backfill Slurry (Class 270-E-500), Pcc Curb & Gutter, Type A2-Var, Pcc Curb Ramps, 4" Thick, Ac Pavement(Patch Back), Detectable Warning Surface, 1" Conduit (Sch 80 Pvc), 2" Conduit (Sch 80 Pvc), 3" Conduit (Sch 80 Pvc), 2-Pair Detector Lead-In Cable, 3-Conductor Signal Cable(Excluding Conduit), 5-Conductor Signal Cable(Excluding Conduit), 12-Conductor Signal Cable(Excluding Conduit), Wire # 6 , Wire #10, No. 5 & 6 Pull Box Incl Pcc Cover, Inductive Loop Detector And Leads Saw Cut, 1-Camera Video Detection System (Complete), Type 170 Atc/Hc-11 Controller, Gps Utb Unit And Antenna, Switch Pack, Ped Isolation Module, 2-Channel Ild Sensor Unit, Type 332 Cabinet, Type Iii-Bf Service Cabinet , Type 24 Standard With Modified 24' High Pole, Type 1 Standard Foundation, 25' Signal Mast Arm, 30' Signal Mast Arm, 40' Signal Mast Arm, 8' Luminaire Mast Arm, 12' Luminaire Mast Arm, Led Luminaires (150W Hps Equivalent), Pedestrian Push Button, Retroreflective Street Name Sign , Led Countdown Pedestrian Head (Complete), 3-12" Led Vehicle Head (Complete) , Pavement Markings (Thermoplastic), 4" Striping (Thermoplastic), 12" Striping (Thermoplastic), Curb Markings (One-Coat Paint), Remove Striping, Remove Pavement Markings (Thermoplastic), Install Sign (Strap And Saddle Bracket), Install Sign (Mast-Arm Hanger), Remove Sign, Traffic Control, Flashing Arrow Sign, Signal & Sign Supplier.
including items of work normally performed by Comet Electric.
Quotations will be broken down into comparable packages as reasonably necessary. Comet Electric will work with interested DBE subcontractors to identify opportunities to break down items into economically feasible packages.
Please call if you need any bidding assistance including but not limited to; obtaining bonding, insurance, equipment, materials and/or supplies.
Comet Electric, Inc intends to work cooperatively with all qualified DBE firms seeking work on this project.
Contractors and Subcontractors must register with D.I.R (Department of Industrial Relations) to bid on public works projects. To verify your status or to obtain a D.I.R number, please visit:
Comet Electric, Inc
21625 Prairie St, Chatsworth, CA 91311
CONTACT: Annalisa Jenrich
(818) 340-0965 Office (818) 280-5751 Direct
(818) 340-4033 Fax