License# 681827

Comet Electric, Inc an Equal Opportunity Employer is requesting sub-bids from all qualified subcontractors and suppliers including certified DBE firms performing commercially useful function for referenced project:

Project Name: Palmdale Boulevard at 90th Street East, Traffic Signal
Agency: Los Angeles County Public Works
Project No. TDS0001694
Bid Date: September 29, 2020 at 11:00 AM
Plans & Specs can be downloaded for free at:
https://www.dropbox.com/sh/uw6oqxoj9iivd24/AACJHHLZf2a1oa_45lerucpa?dl=0
CBE Goal: 25%

Quotes for Services and Supplies requested for the following items for bid including, but not limited to: CONSTRUCTION SCHEDULE (AS-BUILT) (STIPULATED UNIT PRICE OF $1,000), MOBILIZATION - AVE L AT 42ND ST WEST, MOBILIZATION - PALMDALE BLVD AT 90TH ST EAST, SCE FEES (ALLOWANCE OF $7,000), EXPLORATORY EXCAVATION OF UTILITIES (ALLOWANCE OF $20,000), TRAFFIC CONTROL - AVENUE L AT 42ND STREET WEST, TRAFFIC CONTROL - PALMDALE BLVD AT 90TH STREET EAST, CONCRETE REMOVAL (NON-REINFORCED), UNCLASSIFIED EXCAVATION, CRUSHED MISCELLANEOUS BASE, TRENCH BACKFILL SLURRY (CLASS 270-E-500), AC PAVEMENT, PCC CURB, TYPE A1-8, PCC CURB & GUTTER, TYPE A2-8, PCC WALK, 4" THICK, PCC CURB RAMPS, DETECTABLE WARNING SURFACE, CROSS GUTTER, 1" CONDUIT (SCH 80 PVC), 2" CONDUIT (SCH 80 PVC), 3" CONDUIT (SCH 80 PVC), COMPOSITE TYPE 2 PULL BOX INCL COVER, COMPOSITE TYPE 3 PULL BOX INCL COVER, 2-PAIR DETECTOR LEAD-IN CABLE, 3-CONDUCTOR SIGNAL CABLE(EXCLUDING CONDUIT), 5-CONDUCTOR SIGNAL CABLE(EXCLUDING CONDUIT), 12-CONDUCTOR SIGNAL CABLE(EXCLUDING CONDUIT), WIRE #6, WIRE #6, WIRE #10, WIRE #10, 72 STRAND SINGLE MODE FIBER OPTIC CABLE, INDUCTIVE LOOP DETECTOR AND LEADS SAW CUT, REMOVE EXISTING DLC, REMOVE PULL BOX, REMOVE TYPE 1 STANDARD (COMPLETE) (EXCL. FOUND.), REMOVE TYPE 15 STANDARD (COMPLETE) (EXCL. FOUND.), REMOVE TYPE 17 STANDARD (COMPLETE) (EXCL. FOUND.), REMOVE TYPE 19 STANDARD (COMPLETE) (EXCL. FOUND.), REMOVE TYPE 24 STANDARD (COMPLETE) (EXCL. FOUND.), REMOVE TYPE 1 FOUNDATION, REMOVE TYPE 15 FOUNDATION, REMOVE TYPE 17 FOUNDATION, REMOVE TYPE 19 FOUNDATION, REMOVE TYPE 24 FOUNDATION, RELOCATE RETRO REFLECTIVE STREET NAME SIGN, TYPE 2070 CONTROLLER, GPS UTB UNIT AND ANTENNA, SWITCH PACK, PED ISOLATION MODULE, 2-CHANNEL ILD SENSOR UNIT, TYPE 332 CABINET, TYPE 332 CABINET FOUNDATION, TYPE III-BF SERVICE CABINET, TYPE III-B SERVIC CABINET FOUNDATION, TYPE 15 STANDARD, TYPE 15TS STANDARD WITH MODIFIED 19' HIGH POLE, TYPE 19 STANDARD, TYPE 26 STANDARD, TYPE 1 STANDARD FOUNDATION, TYPE 15 STANDARD FOUNDATION, TYPE 17 STANDARD FOUNDATION, TYPE 19 STANDARD FOUNDATION, TYPE 24 STANDARD FOUNDATION, TYPE 26 STANDARD FOUNDATION, 30' SIGNAL MAST ARM, 5' SIGNAL MAST ARM, 12' LUMINAIRE MAST ARM, 12' HORIZONTAL LUMINAIRE MAST ARM, LED LUMINAIRES (150W HPS EQUIVALENT), LED LUMINAIRES (200W HPS EQUIVALENT), PEDESTRIAN PUSH BUTTONB114, PEDESTRIAN PUSH BUTTON PLATE, 3-12" LED VEHICLE HEAD (COMPLETE), LED COUNTDOWN PEDESTRIAN HEAD (COMPLETE), RETROREFLECTIVE STREET NAME SIGN, 8' STRAIGHT ARM CLAMP-ON FOR STREET NAME SIGN, DETAIL 21 (THERMOPLASTIC), DETAIL 22 (THERMOPLASTIC), DETAIL 29 (THERMOPLASTIC), DETAIL 38 (THERMOPLASTIC), DETAIL 38A (THERMOPLASTIC), PAVEMENT MARKINGS (THERMOPLASTIC), 12" STRIPING (THERMOPLASTIC), 24" STRIPING (THERMOPLASTIC), REMOVE PAVEMENT MARKINGS (THERMOPLASTIC), REMOVE STRIPING, RELOCATE SIGN, SIGN PANEL, REMOVE SIGN, REMOVE SIGN POST, FLASHING ARROW SIGN, CHANGEABLE MESSAGE SIGN

Comet Electric, Inc is willing to break items of work into smaller increments to assist DBE Contractors and Suppliers in obtaining work on this project. 100% Performance and Payment bonds required. Subcontractor’s must possess a current contractor’s license.

Requirements: No Contractor or Subcontractor shall be qualified to bid on, be listed in a bid proposal or engage in the performance of any contract for public work, unless currently registered to perform public work with the Dept of Industrial Relations https://efiling.dir.ca.gov/PWCR/Search.action

Please call if you need any bidding assistance including but not limited to; obtaining bonding, insurance, equipment, materials and/or supplies. The US Small Business Administration may also assist you in obtaining bonding - please see the following site for information: http://www.sba.gov/content/contractors#
California Access to Capital Program Financing Solutions for your small business http://www.calbizfinance.org/cal_cert_biz_program.html

Comet Electric, Inc
21625 Prairie St, Chatsworth, CA 91311
Contact: Louis Perez
(818) 280-5751 Office
(818) 340-4033 Fax
louisperez@cometelectric.com

Published on September 18th, 2020 @ 11:00 a.m. by Contractor’s Estimate, Inc.
Located at http://www.contractorsestimate.com
This advertisement will run until the bid date