CA Contractors License #88
12200 Bloomfield Ave.
Santa Fe Springs, Ca. 90670
Griffith Company an Equal Opportunity Employer is requesting sub-bids from all qualified subcontractors and suppliers including certified DBE firms performing a commercially useful function for referenced project:
Agency: LAWA – Los Angeles World Airports
Project: Runway 6L-24R Exits and Runway Rehabilitation Projects
Bid Date: September 22, 2022, at 2:00 p.m.
DBE Goal: 10%
Scope of Work: Sweeping, Flagging, and Vehicle Escort Services, Survey Services, Mobilization - Insurance, Bonds,
Permits, Mobilization - Employee Busing, Mobilization, Demobilization, Construction Barricades, Delineators
and Signs, Temporary Airfield Lighting and Electrical Work, Temporary Air and Water Pollution, Soil Erosion, and Siltation Control, Lighted "X" Runway Closure Marking, Contractor Quality Control, 14-Foot High Portable Jet Blast Deflector Unit, Install Temporary Chain Link Fence, Remove Storm Drain Pipe, Remove Storm Drain Structure, Potholes - Paved Areas, Miscellaneous Removals, Remove Existing Painted Pavement Marking, Fueling System Removal, Fueling System Improvements, Remove Variable Depth Asphalt Pavement, Remove Asphalt Swale, Remove Portland Cement Concrete (PCC) Pavement - Unreinforced and Reinforced, Remove Variable Depth Composite Asphalt Concrete (AC) on Portland Cement Concrete (PCC), Remove Asphalt Concrete (AC) Pavement over Fuel Lines, Remove Portland Cement Concrete (PCC) Pavement over Fuel Lines, Encasement Protection, Storm Drain Concrete Encasement, Subgrade Improvement, Clear and Grub, Embankment In Place, Unclassified Excavation for Disposal, Over Excavation, Subgrade Preparation Type B – Proof Roll, Subgrade Preparation - Scarify and Recompact, Controlled Low Strength Material (P-153) Used in Pavement Section, Aggregate Subbase (P-154), Crushed Aggregate Base Course (P-209), Crushed Aggregate Base Course (Caltrans), Hot Mix Asphalt, Hot Mix Asphalt Pavement (P-401) - PG 76-22M, Hot Mix Asphalt Pavements (P-403), Emulsified Asphalt Seal Coat, Portand Cement Concrete Pavement (P-501) - 19 inches, Reinforced Portland Cement Concrete Pavement (P-501) - 19 inches, Saw Cut Grooves, 18" Class V RCP Storm Drain, 24" Class V RCP Storm Drain, 30" Class V RCP Storm Drain, 36" Class V RCP Storm Drain, Connect to Existing Storm Drain, Aircraft Rated Storm Drain Manhole
48",Aircraft Rated Storm Drain Manhole 56", Aircraft Rated Inlet Structure, Storm Drain Junction Structure, Concrete Swale, Pavement Marking - White (2 Coats), Pavement Marking, Pavement Marking - Surface Painted Holdbar Identifier, Temporary/Refresh Pavement Marking, Temporary Pavement Marking, Install Traffic Signage, Hydroseeding, New Switchgear and Associated Work in Continental City, Remove FAA or AFL Electrical Items, #6 AWG, 5KV, Black or Red, Type L-824 Unshielded Cable, #8 AWG, 5KV, Black or Red, Type L-824 Unshielded Cable, #6 AWG, 600V, Insulated Green Ground Wire, Stranded, No. 8 L-824C, Solid Black Insulation -RWSL, No. 8 L-824C, Solid Red Insulation – RWSL, No. 1/0 AWG Bare Copper Guard Wire - RWSL, No. 6 AWG Insulated Equipment Ground Conductor – RWSL, Modifications to the Airfield Lighting Vault No. 1 & 2, 1-2" Diameter PVC AFL Conduit in New Concrete or New Asphalt or Milled Asphalt, 1-2"C Diameter RGS AFL Conduit in Saw-Kerf in Existing Concrete, 1-2"C Diameter RGS AFL Conduit in Saw-Kerf in Existing Concrete with Asphalt Overlay, 1-2"C Diameter PVC AFL Conduit in Dirt or Non-Paved Earth, 4-4"C PVC AFL Ductbank in New Concrete or New Asphalt or Milled Asphalt, 4-4"C PVC AFL Ductbank in Dirt or Non-Paved Earth, 2-4"C PVC AFL Ductbank in New Concrete or New Asphalt or Milled Asphalt, 2-4"C PVC AFL Ductbank in Dirt or Non-Paved Earth, 4-4"C HDPE Horizontal Directional Drill AFL Ductbank, 1-2"C HDPE Horizontal Directional Drill AFL Ductbank, 2-4"C PVC Concrete Encased – RWSL, 1-4"C PVC, Concrete Encased – RWSL, 1-2"C PVC, Concrete Encased – RWSL, Conduit Connection to Handhole - RWSL, Aircraft Rated Handhole – RWSL, 1-2" HDPE Directional Drill – RWSL, 4' x 4' x 4' Aircraft Rated AFL Handhole, Adjust AFL Handhole or Manhole, Salvage RWSL Fixture, ILC, XFMR, and Grounding Hardware – RWSL, Install Steel Blank Cover-RWSL, L-868B Base Can in New Pavement – RWSL, Install Runway Entrance Light with FAA Furnished ILC – RWSL, Reinstall Runway Entrance Light and ILC – RWSL, RWSL Infrastructure Removal, Contractor Support of FAA during Optimization- RWSL, L-868B Base Can in New Concrete, L-868B Base Can in New Concrete (30" Deep), L-868B Base Can in Existing Concrete, L-868B Base Can and Extension in Milled Asphalt Overlay on Concrete, L-867B Base Can in New Asphalt, L-867B Base Can in Existing or Milled Asphalt, L-867B Base Can in New Asphalt Serving as a Junction Box, L-868B Aircraft Cover Plate, L-867B Cover Plate, L-852C(L) T/W CTL Bidirectional Light & Transformer, L-852C(L) T/W CTL Unidirectional Light & Transformer, L-852D(L) T/W CTL Bidirectional Light & Transformer, L-852D(L) T/W CTL Unidirectional Light & Transformer, L-852C TW CTL 8" Light Fixture w/Special Adaptor Ring & Transformer, L-852G(L) R/W Guard In-Pavement Light & Transformer (Owner Furnished Light), L-861T(L) T/W Edge Light & Transformer, L-804(L) R/W Elevated Guard Light & Transformer, Guidance Sign, Guidance Sign Panels, Miscellaneous Electrical Work, 4' x 4' x 4' Aircraft Rated FAA Handhole (Comm or ELD), Adjust FAA Handhole or Manhole, Aircraft Rated Handhole Lid, Diameter PVC FAA Conduit in Dirt or Non-Paved Earth, FAA Fiber Optic Cable, Diameter FAA Innerduct, FAA 12 Pair 19 Gauge Copper Cable, FOTS Communication Testing &
Connections, FAA-ELD 15kV Rated #2 Concentric Neutral Medium Voltage Cable, FAA-ELD 2-1/C #1 AWG, 1#10 Green Ground (ASOS 480V), FAA PAPI Power Cable (FAA ELD Cable # 2), FAA PAPI Comm Cable (FAA ELD Cable # 3), Remove and Reinstall Windcone on New Foundation, Remove and Reinstall 24L PAPI LHA's and Control Cabinet on New Foundation, Remove and Reinstall ASOS on New Foundation, Remove ASDE Reflectors and Foundations, FAA Miscellaneous Electrical Work, Potholes - Paved Areas, Miscellaneous Removals, Remove Existing Painted Pavement
Marking, Remove Portland Cement Concrete (PCC) - Unreinforced and Reinforced, Remove Portland Cement Concrete (PCC ) Pavement over Fuel Lines, Encasement Protection, Unclassified Excavation for Disposal, Subgrade Preparation Type B -Proof Roll, Subgrade Preparation - Scarify and Recompact Subgrade, Controlled Low Strength Material, PCC Spall Repair, PCC Crack Sealing Epoxy Injection, Saw Cut Grooves, PCC Surface Stabilizer, Miscellaneous Electrical Work, In-Pavement Light & Transformer, Trucking.
PROJECT PLANS & SPECS:
https://www.dropbox.com/sh/46eud6ndimvqy3r/AAD2S7IA1JitYRtyz1euagKVa?dl=0
Griffith Company will work with interested subcontractors to identify opportunities to break down items into economically feasible packages.
Requirements: Griffith Company is signatory to Operating Engineers, Laborers, Teamsters, Cement Masons, and Carpenters Unions. 100% performance and payment bonds required for the full amount of the subcontract price. Subcontractors must possess a current contractor’s license, insurance and worker’s compensation insurance coverage meeting Griffith’s requirements. A copy of the insurance requirements and agreements can be obtained by contacting the Estimator. Please call if you need assistance in obtaining bonding, insurance, equipment, materials, and/or supplies. Griffith Company intends to work cooperatively with all qualified firms seeking work on this project. Griffith Company is an Equal Opp
Griffith Company
12200 Bloomfield Ave. Santa Fe Springs, Ca. 90670
Phone 562-929-1128 Fax 562-864-8970
Contact: Jake Weigand
Email: jweigand@griffithcompany.net |
