Advertisement date July 5th, 2023 @ 3:20 p.m. through bid opening date

Griffith Company Requests Sub-bids from All Qualified & Certified DBE Subcontractors/Suppliers for:
Contracting Agency: Caltrans 06-0X1604
Construction on State Highway In Kern County Near Edison From 0.2 Mile West Of Tejon Highway Overcrossing To Caliente Creek Bridge Bid Date: July 27, 2023, at 2:00 PM
DBE Goal: 21%
Estimate: $10,700,000
Plans & Specs can be viewed for free online at: https://www.dropbox.com/scl/fo/qpgbsownr7pcpqihjxsg5/h?rlkey=j5nxozb7krxxzme8jszaax40d&dl=0

General work description:  HMA (Type A), RHMA-G, JPCP, CRCP & high-speed weigh-in-motion system

**Addendum 1 issued 7/18/23**
**Addendum 2 issued 7/20/23**
https://ppmoe.dot.ca.gov/des/oe/weekly-ads/oe-project.php?q=06-0X1604

Griffith Company an Equal Opportunity Employer requests sub quotes from all qualified subcontractors and suppliers including certified DBE firms performing commercially useful function for the following items of work, including but not limited to: Lead Compliance Plan, Level 2 Critical Path Method Schedule, Time-Related Overhead (Wday), Dispute Resolution Board On-Site Meeting, Hourly Off-Site Dispute-Resolution- Board-Related Tasks, Construction Area Signs, Traffic Control System, Type Iii Barricade, Temporary Traffic Stripe (Tape), Plastic Traffic Drums, Portable Radar Speed Feedback Sign System Day, Temporary Pavement Marker, Temporary Barrier System, Portable Changeable Message Sign (Ls), Alternative Temporary Crash Cushion Tl-3, Job Site Management, Prepare Water Pollution Control Program, Temporary Drainage Inlet Protection, Temporary Fiber Roll, Temporary Construction Entrance, Temporary Concrete Washout, Remove Yellow Thermoplastic Traffic Stripe (Hazardous Waste), Treated Wood Waste, Roadway Excavation, Shoulder Backing, (F) - Structure Backfill (Slurry Cement), Move-In/Move-Out (Erosion Control), Hydromulch, Hydroseed, Compost (Cy), Incorporate Materials, Class 2 Aggregate Subbase, Crack And Seat, Asphalt-Rubber Binder, Precoated Aggregate (Seal Coat), Hot Mix Asphalt (Type A), Rubberized Hot Mix Asphalt (Gap Graded), Place Hot Mix Asphalt Dike (Type E), Place Hot Mix Asphalt Dike (Type F), Tack Coat, Remove Asphalt Concrete Dike, Cold Plane Asphalt Concrete Pavement, Continuously Reinforced Concrete Pavement, Jointed Plain Concrete Pavement, Remove Concrete Pavement And Base, (F) - Structural Concrete, Drainage Inlet, Stress Reducing Slab, 24" Reinforced Concrete Pipe, 24" Corrugated Steel Pipe Downdrain (.079" Thick), 24" Steel Flared End Section, 24" Concrete Flared End Section, Remove Culvert (Lf), Remove Downdrain (Ea), Remove Headwall, Rock Slope Protection (20 Lb, Class I, Method B) (Cy), Rock Slope Protection Fabric (Class 8), Minor Concrete (Curb) (Cy), (F) - Miscellaneous Iron And Steel, Remove Pavement Marker, Pavement Marker (Retroreflective), Remove Roadside Sign (Wood Post), Furnish Single Sheet Aluminum Sign (0.063"-Unframed), Furnish Single Sheet Aluminum Sign (0.080"-Unframed), Furnish Single Sheet Aluminum Sign (0.063"-Framed), Furnish Single Sheet Aluminum Sign (0.080"-Framed), Roadside Sign - One Post, Install Roadside Sign Panel On Existing Post, Install Roadside Sign (Laminated Wood Box Post), Furnish Laminated Wood Box Post (Type L), Midwest Guardrail System (Steel Post), Vegetation Control Mat (Rubber Or Fiber), Double Midwest Guardrail System (Steel Post), Transition Railing (Type Wb-31), End Anchor Assembly (Type Sft-M), Max-Tension Median Terminal, Remove Guardrail, Thermoplastic Pavement Marking (Enhanced Wet Night Visibility), 6" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility), 12" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility), Remove Thermoplastic Traffic Stripe, 12" Rumble Strip (Asphalt Concrete Pavement), 12" Rumble Strip (Concrete Pavement), 6" Traffic Stripe Tape (Warranty) (Broken 17-7), 6" Traffic Stripe Tape (Warranty) (Broken 36-12), 6" Traffic Stripe Tape With Contrast (Warranty), 6" Traffic Stripe Tape With Contrast (Warranty) (Broken 36-12), Traffic Monitoring Station System, Camera Systems, Modifying High Speed Weigh-In-Motion System, Modifying Lighting Systems, Mobilization

Griffith Company will work with interested subcontractors to identify opportunities to break down items into economically feasible packages. 

Requirements: Griffith Company is signatory to Operating Engineers, Laborers, Teamsters, Cement Masons, and Carpenters Unions. 100% performance and payment bonds required for the full amount of the subcontract price. Subcontractors must possess a current contractor’s license, insurance and worker’s compensation insurance coverage meeting Griffith’s requirements. A copy of the insurance requirements and agreements can be obtained by contacting the Estimator. Please call if you need assistance in obtaining bonding, insurance, equipment, materials, and/or supplies. Griffith Company intends to work cooperatively with all qualified firms seeking work on this project. Griffith Company is an Equal Opportunity Employer.  

Griffith Company
CA Contractors License #88
1128 Carrier Parkway Avenue Bakersfield, CA 93308
Phone: 661-392-6640 Fax: 661-393-9525

Published by Contractor’s Estimate, Inc.
Located at http://www.contractorsestimate.com
This advertisement will run through the bid date.