Advertisement date April 22, 2025 @ 11:40 a.m. through bid opening date

Griffith Company Requests Sub-bids from All Qualified & Certified SBE/WBE/MBE/LSA Subcontractors/Suppliers for:
Contracting Agency: Ventura County Transportation Commission
Project: Sespe Creek Overflow Railroad Bridge Repair Project | SPBL-2025-01
NEW BID DATE: Wednesday 5/21 @ 12PM
Seeking SBE/WBE/MBE/LSA participation

***Addendums1-3 have been issued***

Plans & Specs: https://www.dropbox.com/scl/fo/su1yewctkjqtknh9d54x6/AIdw2yPFYURGfy3VuImXO9g?rlkey=al2xfv2ewqdvc8gweatvlrala&st=nflyj9gq&dl=0

The Commission proposes to repair the Sespe Creek Overflow Railroad Bridge, located at approximately Mile Post 423.44on the Santa Paula Branch Line(SPBL), which was damaged during a series of atmospheric river storms during January 2023.

Griffith Company an Equal Opportunity Employer requests sub quotes from all qualified subcontractors and suppliers including certified SBE/WBE/MBE/LSA firms performing commercially useful function for the following items of work, including but not limited to: Mobilization, Demobilization, and Controls, Erosion Control Compliance (Erosivity Waiver for under 5 acres), Reinforcing Steel, Cast-in-place Concrete - Bent Caps and Column Infill Walls (2 Bent),  Cast-in-place Concrete - Columns 4'-0" Diameter (4 - Columns), Cast-in-place Concrete - Abutment 1, Wingwalls, Footing, Miscellaneous iron and steel, Graffiti-Resistant Coating (Abutment 1, Wingwalls, Bents), Site Clearing and grubbing / shrub removal for staging area and access, Track Embankment, Remove and Dispose Track (Salvage Rail Only), Excavation to Waste, Demolition and Removal of Damage Bridge Portion – Concrete, Demolition and Removal of Bent, Underground Utility Investigation, Structure Excavation (Bridge, Wingwall, and RSP), Structure Backfill (Bridge and Wingwall), Remove and Reinstall Existing Rock Slope Protection at Abutment 1 (Remove and dispose of existing RSP Fabric), Furnish and Install Cofferdam/temporary dike, Furnish and install Insulated Joints, Install new track (Timber ties) including ballast, cut spikes, plates, anchors, joint bars, OTM, 115# worn rail, Install sub-ballast, Furnish and Place Ungrouted Class V Riprap (Rock slope protection), Method B Placement, Furnish and Place Ungrouted Class II Riprap (Rock slope protection), Method B Placement, Furnish and Install - Rock Slope Protection Fabric (Single Layer), 6'-0" Diameter Cast-In-Drilled Hole (CIDH) Bent Piles - Total 8, Adhered Bridge Deck Waterproofing, Hot Mix Asphalt (HMA) for Bridge Deck, Furnish and Erect Precast Prestressed Concrete Girder Bridge Superstructure with Walkway, Finish and Erect Precast Concrete Catcher Block, Salvage and reinstall existing bridge girders, Elastomeric Bearings, Wingwall and Proposed Girder Handrail, Traffic Control, Unknown Environmental Regulatory Requirements Allowance, Removal and Disposal of Hazardous Materials (Category 2, 3 and 4) Allowance, Furnish and Place Ungrouted Class V Riprap (Rock slope protection), Method B Placement, Furnish and Place Ungrouted Class II Riprap (Rock slope protection), Method B Placement, Furnish and Install - Rock Slope Protection Fabric (Single Layer), Trucking, Equipment Rental, SWPPING.

NAICS Codes identified for subcontracting opportunities for this project include:
237310, 237990, 238110, 238120, 238190

Griffith Company will work with interested subcontractors to identify opportunities to break down items into economically feasible packages.

Griffith Company
License 88
3050 E. Birch Street,  Brea CA 92821
Phone 714/984-5500 Fax 714/854-0228

Published by Contractor’s Estimate, Inc.
Located at http://www.contractorsestimate.com
This advertisement will run through the bid date.