Advertisement date April 30, 2024 @ 10:00 a.m. through bid opening date

Papich Construction Company Is requesting quotations from all qualified DBE Sub-contractors and Material suppliers for the following project:

Agency: Caltrans No. 06-0Y1304
Project: Construction on State Highway In Kern County About 8 Miles North Of Mckittrick From Cymric Wash Bridge To 0.8 Mile South Of Route 46
Plans & Specs: https://ppmoe.dot.ca.gov/des/oe/weekly-ads/oe-project.php?q=06-0Y1304
DBE Goal: 20% & The estimated cost of the project is $26,000,000.
Bid date: May 23, 2024, at 2:00 PM
Please submit all quotes by 1:00 PM

General work description: Cold plane, place HMA and RHMA-G, and replace culverts.

Estimating Dept.
Email: estimating@papichconstruction.com

Quotes for Services and Supplies requested for the following items for bid including, but not limited to: Lead Compliance Plan, Level 2 Critical Path Method Schedule, Time-Related Overhead (Wday), Dispute Resolution Board On-Site Meeting, Hourly Off-Site Dispute-Resolution- Board-Related Tasks, Construction Area Signs, Traffic Control System, Temporary Traffic Stripe (Tape), Temporary Pavement Marking (Tape), Channelizer (Surface Mounted), Traffic Drum, Portable Radar Speed Feedback Sign System, Portable Signal Systems (Ls), Temporary Pavement Marker, Temporary Barrier System, Portable Changeable Message Sign (Ls), Alternative Temporary Crash Cushion Tl-3, Temporary Radar Speed Feedback Sign System, Automated Flagger Assistance Device Day, Job Site Management, Stormwater Pollution Prevention Plan, Storm Water Annual Report, Street Sweeping, Temporary Concrete Washout, Water Quality Sampling And Analysis Day, Water Quality Monitoring Report, Water Quality Annual Report, Treated Wood Waste, Invasive Species Control, Temporary High-Visibility Fence, Temporary Fence (Type Ertec), Clearing And Grubbing (Ls), Roadway Excavation, Roadway Excavation (Topsoil), Shoulder Backing, Ditch Excavation, Hydromulch, Fiber Rolls, Hydroseed, Compost (Cy), Incorporate Materials, Class 2 Aggregate Base (Cy), Replace Asphalt Concrete Surfacing, Hot Mix Asphalt (Type A), Rubberized Hot Mix Asphalt (Gap Graded), Data Core, Tack Coat, Cold Plane Asphalt Concrete Pavement, (F) - Structural Concrete, Box Culvert, (F) - Structural Concrete, Headwall, (F) - Bar Reinforcing Steel, (F) - Bar Reinforcing Steel (Box Culvert), Stress Reducing Slab, 18" Reinforced Concrete Pipe, 24" Reinforced Concrete Pipe, 48" Reinforced Concrete Pipe, 42" Welded Steel Pipe (.375" Thick), 48" Welded Steel Pipe (.375" Thick), 42" Steel Flared End Section, 48" Steel Flared End Section, 18" Concrete Flared End Section, 24" Concrete Flared End Section, 48" Concrete Flared End Section, 21" X 15" Alternative Flared End Pipe Arch Section, Remove Culvert (Lf), Remove Headwall, Remove Flared End Section (Ea), Cleaning, Inspecting, And Preparing Culvert (Lf), 48" Cured-In-Place Pipeliner, Rock Slope Protection (60 Lb, Class Ii, Method B) (Cy), Rock Slope Protection Fabric (Class 8), Remove Pavement Marker, Delineator (Class 1), Pavement Marker (Retroreflective), Milepost Marker, Marker (Culvert), Object Marker, Remove Marker, Remove Roadside Sign, Reset Roadside Sign, Furnish Single Sheet Aluminum Sign (0.063"-Unframed), Furnish Single Sheet Aluminum Sign (0.080"-Unframed), Furnish Single Sheet Aluminum Sign (0.063"-Framed), Furnish Single Sheet Aluminum Sign (0.080"-Framed), Roadside Sign - One Post, Roadside Sign - Two Post, (F) - Pipe Handrailing, Thermoplastic Pavement Marking (Enhanced Wet Night Visibility), 6" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility) (Broken 12-3), 6" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility) (Broken 36-12), 6" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility), 8" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility), Remove Thermoplastic Traffic Stripe, 6" Rumble Strip (Asphalt Concrete Pavement), 12" Rumble Strip (Asphalt Concrete Pavement), Traffic Monitoring Station System, Mobilization

Requirements: At the time of the bid, all subcontractors must possess a valid and relevant California Contractors License, a valid DIR registration number, meet the project’s minimum insurance requirements, and be 100% bondable. All subcontractor, supplier, and trucking proposals must be in strict accordance with the project plans, specifications, and any addenda issued. In addition, all Supplier and Subcontractors will be required to execute Papich’s standard subcontract or purchase order agreement (available upon request). Waiver of Subrogation will be required. Papich is a signatory contractor and will require a one-time job agreement for any non-union Subcontractors. Submission of a proposal shall constitute subcontractor, supplier, or trucker acceptance of all terms as listed above. Any attempted deviation or revision to said terms shall not be recognized by Papich. Papich can offer DBE firms assistance with bidding this contract including but not limited to: reducing items of work into smaller scopes, providing reimbursement for payment/performance bond premiums, and providing assistance obtaining materials. All requests for assistance must be made prior to the project bid date. Additionally, DBE firms must possess a valid and current certification to be considered for this contract. Questions concerning above requirements should be directed to our office prior to submission of a proposal.

Heavy Civil | Oil & Gas | Power | Site Development | Transportation
398 Sunrise Terrace | Arroyo Grande, CA 93420
Phone: 805-473-3016 Fax: 805-481-5966

Published by Contractor’s Estimate, Inc.
Located at http://www.contractorsestimate.com
This solicitation will be archived 30 days following the bid date