Griffith Company Requests Sub-bids from All Qualified & Certified DBE Subcontractors/Suppliers for:
Contracting Agency: County of Kern | FAA AIP No. : 3-06-0017-057-2024 Contract No.: 24024
Project: Meadows Field Airport (BFL) Taxiway G Rehabilitation and Extension Phase 2
Location: Taft Kern CA
Bid Date: April 17, 2024, at 11:00 AM
DBE Goal: 3.91%
Engineers Estimate: $3,527,097
Plans & Specs can be viewed for free online at: https://www.dropbox.com/scl/fo/c6dd6wvn3lsiyxeiuov08/h?rlkey=lf9lxl8zxoonu18h78p4n2o3r&dl=0
The work to be performed consists, in general, of demolition of existing pavements, installation of airport lighting systems, installation of drainage systems, construction of asphalt pavement overlays and new asphalt pavements, marking of the runway and taxiways, and constructing various improvements on site.
Quotes for Services and Supplies requested for the following items for bid including, but not limited to: Airfield Safety and Traffic Control, Install New CCR, Demolish Existing Base Can, Salvage or Dispose Taxiway Edge Light, Fixture, and Transformer to Owner, Demolish Existing Base Can, Salvage In-Pavement Runway Edge Light, Fixture and Transformer to Owner, Demolish Existing Cable and Conduit, Demolish Existing Cable, Protect Existing Conduit, Demolish Existing Sign Pad, Demolish Existing Sign Pad, Remove and Salvage to Owner Existing Guidance Sign, Demolish Chain Link Fence, Underground Utility Investigation and Potholing, Demolish PCC-Filled Trench, Conduit, and Conductor, Compliance with Pollution, Erosion, and Siltation Control, 18-inch RCP, 14'X4' Storm Drain Inlet with Splash Pad, Storm drain Manhole, Flat Top, Connect to Existing Storm Drainpipe, Chain-Link Fence, No. 8 AWG 5 Kv, L-824, Type C Cable, Installed in Duct Bank or Conduit, No. 6 AWG, Solid, Bare Tinned Copper Counterpoise Wire, Installed in Separate Trench or above the Duct Bank or Conduit, Including Ground Rods and Connections/ Terminations, Electrical Duct Bank, 1W-2" Schedule 40 PVC, Concrete Encased, Electrical Duct Bank:, 2W-2" Schedule 40 PVC, Concrete Encased, 1W-2" Schedule 40 PVC, Non-Encased, 2W-2" Schedule 40 PVC, Non-Encased, L-868B Base Can with Lid, L-861 T(L) Elevated Taxiway Edge Light on New Base Can, L-861 Elevated Runway Edge Light on New Base Can, LED L-858 Airfield Guidance Sign (30L-GS1- W1) and Pad Complete, LED L-858 Airfield Guidance Sign (B-GS7- W1) and Pad, Complete, LED L-858 Airfield Guidance Sign (B-HPS8- W3) and Pad, Complete, LED L-858 Airfield Guidance Sign (B-HPS9- W3) and Pad, Complete, LED L-858 Airfield Guidance Sign (G1-GS1- W1) and Pad, Complete, LED L-858 Airfield Guidance Sign (G1-GS2- W1) and Pad, Complete, LED L-858 Airfield Guidance Sign (G-GS0- W1) and Pad, Complete, LED L-858 Airfield Guidance Sign (G-GS1- W1) and Pad, Complete, LED L-858 Airfield Guidance Sign (G-GS2- W1) and Pad, Complete, LED L-858 Airfield Guidance Sign (G-GS3- W1) and Pad, Complete, LED L-858 Airfield Guidance Sign (G-GS4- W1) and Pad, Complete, LED L-858 Airfield Guidance Sign (G-GS5- W1) and Pad, Complete, LED L-858 Airfield Guidance Sign (H-GS2- W1) and Pad, Complete, Unlit Information Sign and Pad, Location and Protect Existing Equipment, Temporary Lighting, Asphalt Crack Repair, Cold Mill, 2" Depth, Cold Mill, Full Depth, Remove Asphalt Milling, Embankment in Place, On- Site Disposal, Subbase Course (Asphalt Millings with Binder), Crushed Aggregate Base Course- 6 Inches Thick, Crushed Aggregate Base Course- 14 Inches Thick, Crushed Aggregate Base Course-Variable Depth, Asphalt Course, Final Marking, No Beads (Black), Final Marking, With Beads (Yellow, White), Temporary Marking (Yellow, White), Thermoplastic Surface Painted Hold Position Sign (12R-30L), Thermoplastic Surface Painted Hold Position Sign (30L), Pavement Marking Removal, Seeding, Topsoil
Requirements: Griffith Company is signatory to Operating Engineers, Laborers, Teamsters, Cement Masons, and Carpenters Unions. 100% performance and payment bonds required for the full amount of the subcontract price. Subcontractors must possess a current contractor’s license, insurance and worker’s compensation insurance coverage meeting Griffith’s requirements. A copy of the insurance requirements and agreements can be obtained by contacting the Estimator. Please call if you need assistance in obtaining bonding, insurance, equipment, materials, and/or supplies. Griffith Company intends to work cooperatively with all qualified firms seeking work on this project. Griffith Company is an Equal Opportunity Employer. Griffith Company will work with interested subcontractors to identify opportunities to break down items into economically feasible packages
Griffith Company
CA Contractors License #88
1128 Carrier Parkway Avenue Bakersfield, CA 93308
Phone: 661-392-6640 Fax: 661-393-9525
Scott Miles Estimator: Smiles@griffithcompany.net |
