Contractors Estimate.com
Saving contractors time and money by delivering complete bid estimates.

 
Online DVBE certification is here!
ARTICLES
&
EDITORIALS
Advertisement date: December 13th, 2017 @ 4:42 pm through bid opening date

Comet Electric

License# 681827

Is requesting sub-bids from qualified M/W/S/E/DVBE Subcontractors and Suppliers for the following project:

Project No. L1749439

Project Name: NORTH HOLLYWOOD – STUDIO CITY HIGH VOLTAGE CONVERSION

Project Description: This project will convert existing high voltage series street lighting circuits to low voltage multiple circuits (approximately 408 street lights) by replacing conduit, wires and luminaires (no pole replacement). A portion of the conduit installation will be on streets where there is no sidewalk. The project is spread among seven areas: Tujunga, Beverly Grove, Hollywood Hills, Valley Village, Studio City, North Hollywood, and North of Beverly Hills.

BID DATE: January 10, 2018

Project Location: Los Angeles County -North Hollywood- Studio City

MBE 2% WBE 2%. SBE 25% EBE 8% DVBE 3%

Comet Electric, Inc requests subquotes from all qualified subcontractors and suppliers including certified M/W/S/E/DVBE firms performing commercially useful function for the following items of work, including but not limited to: Excavate & Repair Conduit In Parkway, Excavate & Repair Conduit In Street Crossing, Remove Series Service Equipment, Remove & Dispose Of Existing Wires Per General Notes On Sheet 1 Of Project Plans, Replace Damaged Pullbox Lids, Replace Damaged Or Missing Hand Hole Covers (May Vary In Size Or Shape), O.H. Svc. Incl. 2" Galv. Cond. Svc. Riser Complete To Service Pullbox And Coordination With Dwp, Service Junction Connecting Device, U.G. Service Includes Stub-Out Extension And Coordination With D.W.P., 1" Galv. Cond. (Parkway) Incl. Excavations And Restoring Surface To Match Adjacent Surface, 1" Galv. Cond. (St. Cross) Incl. Excavations And Restoring Surface To Match Adjacent Surface, 1" Galv. Cond. Incl. Excavations And Restoring Surface To Match Adjacent Surface (In Street Along Flowline), 1-1/2"Galv.Cond.(St. Cross) Incl. Excavations And Restoring Surface To Match Adjacent Surface, Ground Rod (For Existing Conduit), #10 Thwn Awg Solid Wire, #6 Awg Stranded Wire (For Service No. 18, Sheet 12), #8 Awg Stranded Wire (600V), Pullbox, No. 3-1/2 With Steel Cover (Traffic Rated) Incl Lid, Bends, Exc & Restore To Match Adj Surface, Pullbox, Type 2 Armorcast Incl. Lid, Bends, Excavating, & Restoring Surface To Match Adj. Surface. (Or Bsl Approved Equal), Pullbox, Type 3 Armorcast Incl. Lid, Bends, Excavating, & Restoring Surface To Match Adj. Surface. (Or Bsl Approved Equal), 10 Amp Fuse Kit (Includes Cartridge Fuse), 30 Amp Fuse Kit (Includes Cartridge Fuse), Led Luminaire (100W Hps Replacement) Per Plan (Or 70W Hps Eq) And Includes Removal Of Existing Equipment, Led Luminaire (150W Hps Replacement) Per Plan And Includes Removal Of Existing Equipment, Led Luminaire (200W Hps Replacement) Per Plan And Includes Removal Of Existing Equipment, Led Luminaire (250W Hps Replacement) Per Plan And Includes Removal Of Existing Equipment, Led Post Top Lamp (Incl Retrofit Kit, Socket, Etc.) Per Plan And Includes Removal Of Existing Equipment, Philips City Touch Lum Controller, Ssre Relay Per Plan, Pe Cell Pole Cap (Cd 851), Pe Cell Pole Cap (Cd 953), Pe Cell Pole Cap (Cd 855), Pe Cell Pole Cap (Cd 951), Pe Cell Pole Cap (Cd 814), P.E. Collar Per Plan.

including items of work normally performed by Comet Electric.
Quotations will be broken down into comparable packages as reasonably necessary. Comet Electric will work with interested M/W/S/E/DVBE subcontractors to identify opportunities to break down items into economically feasible packages.

The contract documents for this project are available for viewing at our office located at: 21625 Prairie St, Chatsworth, CA 91311. They can also be viewed online:

https://www.labavn.org/index.cfm?fuseaction=contract.opportunity_view&recordid=31814

Please call if you need any bidding assistance including but not limited to; obtaining bonding, insurance, equipment, materials and/or supplies.
Comet Electric, Inc intends to work cooperatively with all qualified M/W/S/E/DVBE firms seeking work on this project.


Comet Electric, Inc
21625 Prairie St, Chatsworth, CA 91311

CONTACT: Annalisa Jenrich

(818) 340-0965 Office

(818) 280-5751 Direct

(818) 340-4033 Fax

annalisajenrich@cometelectric.com

 

 

 


Published on December 13th, 2017 @ 4:42 pm by Contractor’s Estimate, Inc.
Located at http://www.contractorsestimate.com

This advertisement will run until the bid date

 
NEWS
&
EVENTS
 
What are we about? Contact us HOME