Is requesting sub-bids from qualified DBE Subcontractors and Suppliers for the following project:
Federal Aid Project No. CML-5064(083)
Project Name: Metro Goldline At-Grade Crossing Mobility Enhancements
Project Description: At-Grade Crossing Mobility Enhancements
BID DATE: January 17, 2018 @ 2:00 p.m
****Addendum No. 1 issued 12/07/2017****
revision of Bid opening date to January 17, 2018
Project Location: Pasadena, Ca at Del Mar Blvd & Raymond Ave/ California Blvd & Raymond Ave/ Glenarm St. & Raymond Ave/ Del Mar Blvd & Marengo Ave/ California Blvd & Marengo Ave/ Glenarm St. & Marego Ave/ California Blvd & Arroyo Parkway Ave/ Del Mar Blvd & Arroyo Parkway Ave.
DBE goal: 4%
Comet Electric, Inc requests subquotes from all qualified subcontractors and suppliers including certified DBE firms performing commercially useful function for the following items of work, including but not limited to: Furnish And Install A 332 Cabinet Foundation, Complete., Remove Existing 332 Cabinet Foundation, Complete., Furnish And Install New 332 Cabinet With 2070 Controller, Complete., Furnish And Install A Temporary Traffic Signal Cabinet And Controller, Complete., Remove And Salvage Existing 332 Cabinet And Controller, Complete., Remove And Salvage Existing Video Detection Cameras, Complete., Furnish And Install New Video Detection Cameras, Per These Special Provisions, Complete., Remove And Salvage Existing Cctv Camera Complete., Furnish And Install Cctv Camera, Complete., Furnish And Install Pasadena Type 3 Pull Box (With Extenders) In Paved Area, Complete. (Doublestack), Furnish And Install Pasadena Type 3 Pull Box In Existing Conduit Run In Paved Area, Complete. (Bc), Remove Existing Pull Box, Replace With Pasadena Type 3 Pull Box, Complete, In Paved Area., Furnish And Install 3" Galvanized Rigid Conduit In Roadway, Complete., Furnish And Install 3" Galvanized Rigid Conduit In Parkway, Complete., Furnish And Install Traffic Signal Conductors, Complete., Furnish And Install 48 Strand Smfo Fiber Optic Cable, Complete., Splice Existing Fiber Optic Cables, Complete., Remove And Relocate Existing Pre- Emption Equipment, Complete., Furnish And Install Software And Testing Services, Complete., Disconnect, Remove Battery Cabinet And Batteries; Dispose Of Existing Battery Cells, Complete., Furnish And Install Battery Cells (Clary Type), Complete., Reinstall Battery Cabinet And Reconnect Batteries, Complete.
including items of work normally performed by Comet Electric.
Quotations will be broken down into comparable packages as reasonably necessary. Comet Electric will work with interested DBE subcontractors to identify opportunities to break down items into economically feasible packages.
The contract documents for this project are available for viewing at our office located at: 21625 Prairie St, Chatsworth, CA 91311. They can also be viewed online:
Please call if you need any bidding assistance including but not limited to; obtaining bonding, insurance, equipment, materials and/or supplies.
Comet Electric, Inc intends to work cooperatively with all qualified DBE firms seeking work on this project.
Comet Electric, Inc
21625 Prairie St, Chatsworth, CA 91311
CONTACT: Annalisa Jenrich
(818) 340-0965 Office
(818) 280-5751 Direct
(818) 340-4033 Fax