Papich Construction Company Is requesting quotations from all qualified DBE Sub-contractors and Material suppliers for the following project:
Agency: Caltrans No. 06-0X2604
CONSTRUCTION ON STATE HIGHWAY IN TULARE COUNTY IN AND NEAR VISALIA AT VARIOUS
LOCATIONS FROM 1.6 MILES EAST OF KINGS COUNTY LINE TO 0.2 MILE WEST OF SEQUOIA
NATIONAL PARK BOUNDARY
Engineers Estimate: $11,400,000 - DBE Goal: 22%
Plans & Specs: https://ppmoe.dot.ca.gov/des/oe/weekly-ads/oe-project.php?q=06-0X2604&sub=
Bids open Thursday, January 11, 2024 @ 2:00 PM
Description: Remove, install, and repair drainage facilities
Quotes for Services and Supplies requested for the following items for bid including, but not limited to:Level 2 Critical Path Method Schedule, Time-Related Overhead (Wday), Dispute Resolution Board On-Site Meeting, Hourly Off-Site Dispute-Resolution-Board-Related Tasks, Develop Water Supply, Construction Area Signs, Traffic Control System, Traffic Control Supervisor, Flashing Arrow Sign, Type Iii Barricade, Temporary Traffic Stripe (Paint), Channelizer (Surface Mounted), Portable Radar Speed Feedback Sign System Day, Temporary Pavement Marker, Temporary Barrier System, Portable Changeable Message Sign (Ls), Alternative Temporary Crash Cushion Tl-3, Temporary Radar Speed Feedback Sign System, Job Site Management, Stormwater Pollution Prevention Plan, Temporary Hydraulic Mulch (Bonded Fiber Matrix), Temporary Drainage Inlet Protection, Temporary Fiber Roll, Temporary Gravel Bag Berm, Temporary Construction Entrance, Street Sweeping, Temporary Concrete Washout, Water Quality Sampling And Analysis Day, Water Quality Monitoring Report, Water Quality Annual Report, Treated Wood Waste, Temporary High-Visibility Fence, Clearing And Grubbing (Ls), Roadway Excavation, Ditch Excavation, Move-In/Move- Out (Erosion Control), Hydroseed, Class 2 Aggregate Base (Cy), Hot Mix Asphalt (Type A), Rubberized Hot Mix Asphalt (Gap Graded), Place Hot Mix Asphalt Dike (Type A), Place Hot Mix Asphalt Dike (Type D), Place Hot Mix Asphalt Dike (Type E), Place Hot Mix Asphalt Dike (Type F), Tack Coat, Remove Asphalt Concrete Dike, (F) - Structural Concrete, Headwall, (F) - Structural Concrete, Drainage Inlet, (F) - Concrete Backfill (Pipe Trench), Stress Reducing Slab, 8" Plastic Pipe (Wall Drain), 18" Reinforced Concrete Pipe, 24" Reinforced Concrete Pipe Trenchless Installation Method, 24" Reinforced Concrete Pipe, 36" Reinforced Concrete Pipe, 48" Reinforced Concrete Pipe, Drainage Inlet Marker, 36" Corrugated Steel Pipe Inlet (.079" Thick), 24" Concrete Flared End Section, 48" Concrete Flared End Section, 36" Precast Concrete Pipe Inlet, Inlet Depression, 24" Epdm Rubber Pipe Joint Seal, Abandon
Culvert (Lf), Abandon Drainage Structure (Junction Structure), Abandon Inlet, Remove Overside Drain, Remove Pipe (Lf), Remove Inlet, Remove Headwall, Remove Flared End Section (Ea), Cleaning, Inspecting, And Preparing Culvert (Lf), 12" Cured-In-Place Pipeliner, 18" Cured-In-Place Pipeliner, 24" Cured-In-Place Pipeliner, 36" Cured-In-Place Pipeliner, 42" Cured-In-Place Pipeliner, Rock Slope Protection (150 Lb, Class Iii, Method B) (Cy), Rock Slope Protection (60 Lb, Class Ii, Method B) (Cy), Rock Slope Protection Fabric (Class 8), Minor Concrete (Curb And Gutter), Minor Concrete (Sidewalk), (F) - Miscellaneous Iron And Steel, Reset Fence, Remove Pavement Marker, Reset Markers And Delineators, Pavement Marker (Retroreflective), Reset Milepost Marker, Relocate Roadside Sign-One Post, Single Thrie Beam Barrier (Steel Post), Double Thrie Beam Barrier (Steel Post), Remove Guardrail, 6" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility) (Broken 12-3), 6" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility) (Broken 36-12), 6" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility), 8" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility), 12" Thermoplastic Traffic Stripe (Enhanced Wet Night Visibility), 12" Rumble Strip (Asphalt Concrete Pavement), Mobilization
Requirements: At the time of the bid, all subcontractors must possess a valid and relevant California Contractors License, a valid DIR registration number, meet the project’s minimum insurance requirements, and be 100% bondable. All subcontractor, supplier, and trucking proposals must be in strict accordance with the project plans, specifications, and any addenda issued. In addition, all Supplier and Subcontractors will be required to execute Papich’s standard subcontract or purchase order agreement (available upon request). Waiver of Subrogation will be required. Papich is a signatory contractor and will require a one-time job agreement for any non-union Subcontractors. Submission of a proposal shall constitute subcontractor, supplier, or trucker acceptance of all terms as listed above. Any attempted deviation or revision to said terms shall not be recognized by Papich. Papich can offer DBE firms assistance with bidding this contract including but not limited to: reducing items of work into smaller scopes, providing reimbursement for payment/performance bond premiums, and providing assistance obtaining materials. All requests for assistance must be made prior to the project bid date. Additionally, DBE firms must possess a valid and current certification to be considered for this contract. Questions concerning above requirements should be directed to our office prior to submission of a proposal.
Heavy Civil | Oil & Gas | Power | Site Development | Transportation
398 Sunrise Terrace | Arroyo Grande, CA 93420
Phone: 805-473-3016 Fax: 805-481-5966 |
