_old.jpg)
Comet Electric, Inc an Equal Opportunity Employer is requesting sub-bids from all qualified subcontractors and suppliers including certified DBE firms performing commercially useful function for referenced project:
Agency: City of Baldwin Park - CIP 20-31 & CIP 20-35 Federal Project No. HSIP-5323(032)
Project: Pacific Avenue and Bogart Avenue Traffic Signalization
Plans & Specs: https://www.dropbox.com/scl/fo/tve2wixfsbfhnpout7rdu/h?rlkey=elm42ug0bfn160ayi254gwyg0&dl=0
DBE Goal: 28.3%
Bid Date: Tuesday, January 23, 2024 @ 2PM
The general nature of work consists of signalizing the existing stop-controlled intersection at Pacific Avenue and Bogart Avenue. The existing grade crossing at Pacific Avenue will be modernized to current SCRRA/Metrolink standards and will include cold mill and overlay of existing pavement , signage and striping installation, traffic signal installation, sidewalks, curb and gutter demolition and installation, crossing panel installation, gate installation, traffic loop installation, and the installation of a new signal house. Related work includes adjusting manhole and utility covers to finished grade, traffic control and all appurtenant work.
Quotes for Services and Supplies requested for the following items for bid including, but not limited to:
Mobilization, Demobilization, Traffic Control, Sawcut And Remove Existing Asphalt, Aggregate Base, Curb/ Curb & Gutter, And Sidewalk., Provide Traffic Striping, Markings, Curb Painting, And Signs, Furnish And Install New Traffic Signals For Intersection Of Pacific Ave. At Bogart Ave. And Downing Ave., Cold Mill Existing Asphalt Concrete (Ac) Pavement (1.5” Depth), And Overlay 1.5” Arhm (C2-Pg64-16), Construct 12” Full Depth Ac, Construct 8” (Type A2-8(200) Concrete Curb & Gutter Over 6" CMB, Construct 8” Concrete Median Curb (Type A1-8(200) Over 6" CMB, Construct 6” Concrete Curb And Gutter (Type A2-6(150) Over 6" CMB, Construct 6” Concrete Curb Type A1-6(150) Over 6" CMB, Construct Concrete Curb & Gutter With Variable Curb Face Over 6" CMB, Construct 4” Thick P.C.C Sidewalk Over 6" CMB, Joints Per Sppwc Std Plan No. 112-2, Construct Concrete Various Curb Ramp Per Details On The Plan, Adjust Existing Manhole, To Finished Grade, Adjust Existing Valve To Finished Grade, Adjust Existing Pull Box To Finished Grade, Construct Masonry Retaining Wall Including The Footing, Construct Modified Cross And Longitudinal Gutter Per Sppwc Std Plan No. 122-3, Furnish And Install New Metal Fence At East Side Of Rr Per Metrolink Engineering Standard No.5102, Furnish And Install 3” To 4” Rock Blanket, Remove And Replace Metal Fence With The Same Kind And Color Of Existing Fence At West Side Of Rr And Per Metrolink Engineering Standard Plan No. 5102, Re-Establish Survey Monuments And Center Line Ties., Construct (HMA) Pavement At The Pedestrian Rr Crossing Compacted In Lifts Per Scrra Spec., Furnish And Install Metal Hand Railing Per Scrra Std. Plan No. Es4005, Detectable Warning Panel Per Caltrans Std Plan No. Rspa88A, Furnish And Install 4’ High Chain Link Fence Per Scrra, Standard Plan On Top Of Retaining Wall, Construct Ac Paved Ramp At The Edge Of Pedestrian Crossing Per Scrra Std Plan No. Es4201, Section 7, Remove Part Of Existing Block Wall And Shrub
Comet Electric, Inc is willing to break items of work into smaller increments to assist DBE Contractors and Suppliers in obtaining work on this project. 100% Performance and Payment bonds required. Subcontractor’s must possess a current contractor’s license.
Requirements: No Contractor or Subcontractor shall be qualified to bid on, be listed in a bid proposal or engage in the performance of any contract for public work, unless currently registered to perform public work with the Dept of Industrial Relations https://efiling.dir.ca.gov/PWCR/Search.action
Please call if you need any bidding assistance including but not limited to; obtaining bonding, insurance, equipment, materials and/or supplies. The US Small Business Administration may also assist you in obtaining bonding - please see the following site for information: http://www.sba.gov/content/contractors#
California Access to Capital Program Financing Solutions for your small business http://www.calbizfinance.org/cal_cert_biz_program.html
Comet Electric, Inc
License# 681827
21625 Prairie St, Chatsworth, CA 91311
Robbie Brenning | robbiebrenning@cometelectric.com
818-340-0965 Office
818-340-4033 Fax |
